PD Space Guitar Synthesizer Forum

Looked it up, and I think I know what the problem is..
the irig 1 is not a real audiointerface. It uses the mike input from your phones audio jack.
it will cause feedback (which is most likely the phasing you referred to) and bad sound with SG, and with any app that uses high gain.

I'm not sure what's happening.
I've tried it with apple phone/microphone and with those I get a test tone
but I'm not sure where the input is coming from.
The built in or the microphone/headphones.
This might be a iOS 15 iPad related issue.
I'll try something else and report back.
iOS audio has imho gotten worse with updates....

Great thanx !

well, there is a hard hold built in, and it actually allows to play the synth on top over it

In the REMOTE tab:
- set the autohold level to +30db so that it don't trigger on velocity.
- now hitting the hold button will freeze the current synthsignal. you can tie a CC to this hold button.
- if you set decay to 30 sec, it will be infinite.

Note: It takes some practice to make a nice soft hold signal, to be able to play lead etc over it.

CAUTION: ** The REMOTE tab sliders cause occaisonal crashes in version 1.2.4. when incoming CC's are connected.
This is allready fixed here at the lab, and will be relased with next update

Would it be possible to have another hold mode, like the EHX freeze?
To be able to play on top.
Or is it too cpu draining?

The settings are the same
iOS audio, 256 ( I've tried all )
No test tone from SG with the iPad.
(And that should work in any case.)

I'll try with apple inear with microphone to make sure it's not the input on the iPad but it's worked prior and I've not noticed anything weird using headphones without the microphone.

And it's working fine with the Itrack dock at a lower latency 128.

Quote from: Brak(E)man on Sep 18, 2022, 04:32 PMIrig 1 is working perfectly with SG on my 2016 iPhone SE
But not on my iPad 5th gen.
Weird sound almost like phase cancellation.
Sound goes in and out according to the meters.
Both are running iOS 15.6.1

that's weird!
Is there no dry/wet on your irig?
plug in or standalone?
what are the interface settings?

There is a bug in startup, which might occur when the attack ( on the first row ) is not zero in the first patch loaded.
and a second bug when remote midi automation is enabled.
Both are fixed here at my lab, but I need to doublecheck everything before releasing, might take a few days.

Quote from: Paul Driessen on Sep 16, 2022, 12:16 PMSG does not feature master/override settings: you can however allways override everything with host automation.
this means that the host (e.g. AUM) can set the Pitch and Octave parameters (as well as all other parameters..)
inside SG, the logic is based on presets, analog to normal guitar multifx pedals.

I am going to try it out, sounds like  that is just what I needed. Thanks !

Irig 1 is working perfectly with SG on my 2016 iPhone SE
But not on my iPad 5th gen.
Weird sound almost like phase cancellation.
Sound goes in and out according to the meters.
Both are running iOS 15.6.1