tab: FX ( chorus/rotor/phaser & delay )

Started by PDFX, Feb 06, 2023, 12:01 PM

Previous topic - Next topic

PDFX

Screenshot 2023-10-06 at 17.13.45.png
The FX tab contains 2 timebased effects: modulator and delay


MOD - the centered label is also the on/off switch of this modulator
CHORUS/ROTOR/PHASER - choose between a chorus and a rotating speaker sim.
BLEND - mixes the dry signal with the modulated signal. The mix of 50% gives the most rich sound.
FREQ - speed with which the modulator delay changes.
DEPTH - how much time the modulator is using at the max.
STEREO - chorus: phase difference between l & R rotor: depth of stereo phaser: speed difference between L & R
FEEDBACK - feedback in a delayed signal leads to colorisation, which with changing time constants leads to a bit of caleidoscopic flavour.
CENTER - center frequency for the phaser

DELAY - the centered label is also the on/off switch of this delay
LEVEL - mixlevel
REPEATS - repeats ( multiple playhead emulation)
TIME - delay time in milliseconds
FEEDBACK - determines how many repeats you get
TONE - a bandpass filter to colorise the delayed tone..
Q - ..the severness of this colorisation. Keep  this at 0 for straight delays. the colorisation is incremental with every repeat of the delay: this is used to get a bit of oldschool delay flavour
SYNC here you can sync to the BPM that is declared in the SETUP tab, which can also be the host BPM.
OFF - uses the TIME knob, other positions are based upon the master BPM.
X 1.5 makes the SYN knob use a dotted time, 1.5 times longer than the BPM note.
Setting 1/2 is half a quarter note, which is an eight note
Setting 1/3 is fit for 12/8 in a 4/4