the REMOTE tab and options

Started by Paul Driessen, Sep 15, 2022, 12:22 PM

Previous topic - Next topic

Paul Driessen

the REMOTE tab has midi controllable siders in it.
Incoming MIDI CC (Continuous Controller) commands can be linked to the 4 Sliders.

You cannot view this attachment.

there Sliders are
  • OFF - slider is disabled
  • BLEND - slider will go from 0 to max BLEND. The BLEND knob needs to be at the max synth level you want to achieve
  • SYNTH - this levels the output of the signal going to the amp, dry plus synth
  • AMP - master ouput level of teh amp

  • MAX SHIFT - The shift is summed upon the normal shift that is determined by OCT and PITCH.
  • MARGIN -This will ignore a certain percentage of your footpedal's range at the heel and toe. This assures that your guitar will sound in tune. More extreme settings will make this a pitch switch instead of a glide

  • moves the cutoff from MIN to MAX. The SENSE knob also does this, so if you want just this slider to control the cutoff, set SENSE to 0

  • HOLD - the knob on the bottom is the master hold switch: it can work like a normal piano hold pedal
  • Auto Hold Level - whenever HOLD is activated, this determines the level at which the hold buffer will be refreshed with new sound. For a new sound to be detected, the attack has to be more than 100mS. this is to ensure that pickattacks and noise are not sustained
    Regardless of this setting, the buffer will fill at each press of the HOLD knob.
    Just turn Auto hold Level at 30dB, and it will never fire.
    **PLEASE BEWARE**: using Auto Hold, requires clean in tune playing without glides and bends, otherwise the none chromatic content of your guitar's sound will slip into the hold buffer!
  • Decay - The decay time of the hold signal
  • Damping - Often it is unnatural to have the higher frequencies sustained that long. A higher setting here will shorten the life of the higer frequencies in the holdbuffer.